TEFLON® Release Coating
Spray on coating for pressure sensitive stickes
Printing Rolls
Web Cleaning Sleeves
Fluoro-Trac
 

Gas Sampling Bags
of FEP, PTFE, PFA, TEFZEL, TEDLAR, & KYNAR

Recommended Uses

  • Recommended for analysis of TCLP gases, CO, H.S, radon and mercaptans
  • "Grab" sampling
  • Preparation of calibration gas standards
  • Gas blending
  • Stack sampling
  • Emission testing

Advantages

  • Lowest permeability of all types of bags
  • Easily cleaned and reused
  • Complete resistance to all chemicals

 

Properties of Fluoron Gas Sampling Bags made from TEFLON® FEP

Property
Values base on FEP
ASTM Test Methods
THERMAL
Melting Point
530ºF
Flammability
Non-Flammable
D635
PHYSICAL
Size Range
Any Size Up to 46' (14m)
Thickness Range (standard: .020" (.5mm)) .002", .005", .010", .020", .060" (.05mm, .127mm, .25mm, .5mm, 1.5mm)  
Ultimate Tensile Test
3000 psi
D882-61T
Elongation
250%
D882-61T
Hardness, 25ºC
     P&J Plastometer
     Shore Durometer (A Scale)
17
A96
Clarity
Transparent
Wettability (Contact Angle)
108º
Coefficient of Friction 0.2
CHEMICAL
Effect of all acids
None
D543
Effect of all alkalies
None
D543
Effect of all organic solvents
None
D543
Water absorption 1/8" thickness
<0.01%
D570

Also Available in Tedlar® PVF

*Teflon® and Tedlar® are registered trademarks of DuPont used under license by Fluoron, Inc.

 

 

Copyright © 2002-2013 Fluoron Inc. All rights reserved